Test and print, Kinetics mode, Set wavelength – LABEC V-18 User Manual

Page 19: Set parameters

Advertising
background image

16/18 Manual

16

☺ Test and Print

Pull the unknown concentration sample in the light path, then press

【START】

,

now it enters the testing interface. Press

【START】

again, you’ll get

the concentration of the sample.(Fig. 28)


START


RETURN

Fig. 28

The operation is the same if you have more samples to test.

Press

【PRINT】

to print the test results. All the data will be deleted after

printing.

You can also delete the test results by pressing

【

CLEAR

】

.

3. Kinetics Mode

Move the cursor on “

Kinetics”

by pressing

【∧

∧

∧

∧】

and

【∨

∨

∨

∨】

in the main menu,

then press

【

ENTER

】

to go into kinetics pre-testing interface.

(

Fig.29

)



ENTER


RETURN


Fig. 29

☺ Set Wavelength

Press

【GOTO λ】

in the kinetics pre-testing interface, input the testing

wavelength

by pressing the numeric keypad. (Fig.30). Reference Page

7, you’ll get a detailed instruction.

GOTO λ

λ

λ

λ



RETURN

Fig. 30

☺ Set Parameters

Coefficient: A=KC+B

0.001 Abs

1.200 mg/l

546.0 nm

546.0nm -0.000Abs
No. WL Abs Conc

1

546.0 0.001 1.0 g/l

○

○

○

○Basic Mode
○

○

○

○Quantitative
●

●

●

●Kinetics 08:00
○

○

○

○Utility 01/01

Kinetics

100.0 T%

546.0 nm

Kinetics

100.0 T%

546.0 nm

Kinetics
WL
=

=

=

=546.0nm

Please Input New:

:

:

:

WL=

Advertising
This manual is related to the following products: