9 fast connect commands, F – fast connect control, Syntax – Longshine LCS-8156C1 User Manual
Page 109: Defined values
Advertising
AT Commands for CX930xx Modem Reference Manual
102752B
Conexant
3-85
3.2.9
Fast Connect Commands
$F – Fast Connect Control
This command allows configuring of the client modem to connect to a central site modem
that supports non-standard V.22, V.22 bis, and V.29 fast connect protocols. It is used in
conjunction with S17.
Syntax
$F<n>
Defined Values
<n>
Decimal number which specifies the initial requested mode of
operation when the modem is operating as the originator. The
options are:
0 Normal
connection
(Default)
1
Fast connect without answer tone
2
V.22 fast connect
3
Fast connect with answer tone
4 V.29
FastPOS
6
V.29 FastPOS with alternate sequence
Advertising