I - identification, Syntax, Defined values – Longshine LCS-8156C1 User Manual
Page 31: Result codes, Gmi - request manufacturer identification, Typical response
Advertising
AT Commands for CX930xx Modem Reference Manual
102752B
Conexant
3-7
I - Identification
This command causes the modem to reports the requested result according to the
command parameter.
Syntax
I<value>
Defined Values
<value>
Decimal number corresponding to the selected information.
0
Reports product code, e.g., “56000”.
1 Reports
“OK”.
2 Reports
“OK”.
3
Reports masked firmware identification code.
Example:
CX93000-V92
4 Reports
“OK”
5
Reports Country Code parameter (see +GCI).
6 Reports
“OK”.
7 Reports
“OK”.
Result Codes
OK
<value> = 0 - 7.
ERROR Otherwise.
+GMI - Request Manufacturer Identification
This command causes the modem to report the modem product manufacturer.
Syntax
+GMI
Typical Response
+GMI: CONEXANT
OK
Advertising