Longshine LCS-8156C1 - Manual (Page 191)

Index
$
$F – Fast Connect Control ...............................................3-86
%
%7 - Plug and Play Serial Number ..................................3-12
%8 - Plug and Play Vendor ID and Product Number .......3-13
%C - Enable/Disable Data Compression .........................3-74
%E - Enable/Disable Line Quality Monitor .......................3-57
%L - Report Line Signal Level .........................................3-43
%Q - Report Line Signal Quality ......................................3-43
%TT - PTT Test Command ..............................................3-79
&
&C - RLSD (DCD) Option ................................................3-22
&D - DTR Option ..............................................................3-22
&F - Restore Factory Configuration .................................3-10
&G - Select Guard Tone ..................................................3-39
&K - Flow Control .............................................................3-23
&M - Asynchronous/Synchronous Mode Selection..........3-24
&P - Select Pulse Dial Make/Break Ratio ........................3-39
&Q - Sync/Async Mode....................................................3-25
&R - RTS/CTS Option......................................................3-26
&S - DSR Override...........................................................3-26
&T - Local Analog Loopback Test....................................3-10
&V - Display Current Configuration..................................3-40
&V1 - Display Last Connection Statistics.........................3-41
&W - Store Current Configuration ....................................3-11
&Y - Designate a Default Reset Profile............................3-11
&Zn=x - Store Telephone Number ...................................3-12
*
**- Download Firmware Code ..........................................3-13
*B - Display Blacklisted Numbers ....................................3-43
*D - Display Delayed Numbers ........................................3-44
+
+DR - Data Compression Reporting ................................3-72
+DS - Data Compression .................................................3-70
+DS44 - V.44 Compression Select ..................................3-71
+EB - Break Handling in Error Control Operation ............3-62
+EFCS - 32-bit Frame Check Sequence .........................3-63
+ER - Error Control Reporting..........................................3-64
+ES - Error Control and Sync Mode Selection ................3-59
+ESA - Configure Synchronous Access Submode ..........3-75
+ESR - Selective Repeat .................................................3-62
+ETBM - Call Termination Buffer Management ...............3-66
+FAA - Auto Answer Enable ..............................................4-6
+FAE - Auto Answer Enable ..............................................4-7
+FAR - Adaptive Reception Control.................................4-13
+FCL - Carrier Loss Timeout ...........................................4-14
+FCLASS- Select Active Service Class .............................3-2
+FCLASS=1 - Select Facsimile Class 1 Mode ..................4-6
+FCLASS=1.0 - Select Facsimile Class 1.0 Mode ............4-6
+FCLASS=8 - Select Voice Mode......................................5-4
+FDD - Double Escape Character Replacement .............4-15
+FIT - DTE Inactivity Timeout.......................................... 4-16
+FLO - Flow Control ........................................................ 4-19
+FMI? - Request Manufacturer Identification .................. 4-18
+FMM? - Request Model Identification............................ 4-18
+FMR? - Request Revision Identification ........................ 4-18
+FPR - Fixed DTE Rate .................................................. 4-17
+FRH - Receive Data with HDLC Framing...................... 4-12
+FRM - Receive Data...................................................... 4-10
+FRS - Receive Silence .................................................... 4-8
+FTH - Transmit Data with HDLC Framing ..................... 4-11
+FTM - Transmit Facsimile................................................ 4-9
+FTS - Transmit Silence.................................................... 4-7
+GCI - Country of Installation ............................................ 3-9
+GMI - Request Conexant Identification ........................... 3-8
+GMI - Request Manufacturer Identification...................... 3-7
+GMM - Request Model Identification ............................... 3-8
+GMR - Request Revision Identification ........................... 3-8
+IBC – In Band Commands............................................. 3-29
+IFC - DTE-Modem Local Flow Control .......................... 3-28
+IPR - Fixed DTE Rate.................................................... 3-27
+ITF - Transmit Flow Control Thresholds........................ 3-77
+MR - Modulation Reporting Control............................... 3-55
+MS - Modulation Selection ............................................ 3-53
+PCW - Call Waiting Enable ........................................... 3-87
+PIG - PCM Upstream Ignore ......................................... 3-91
+PMH - Modem-on-Hold Enable ..................................... 3-88
+PMHF - V.92 Modem-on-Hold Hook Flash.................... 3-91
+PMHR - Initiate Modem-on-Hold ................................... 3-90
+PMHT – Modem-on-Hold Timer .................................... 3-89
+PQC - V.92 Phase 1 and Phase 2 Control .................... 3-92
+PSS - Use Short Sequence........................................... 3-93
+VCID - Caller ID (CID) ..................................................... 3-3
+VDR - Distinctive Ring................................................... 5-20
+VDT - Control Tone Cadence Reporting ....................... 5-21
+VDX - Speakerphone Duplex Mode .............................. 5-24
+VGM - Microphone Gain................................................ 5-25
+VGR - Voice Gain Receive (Record Gain) ...................... 5-9
+VGS - Speaker Gain...................................................... 5-26
+VGT - Voice Gain Transmit (Playback Volume) ............ 5-10
+VIP - Voice Initialize All Parameters................................ 5-5
+VIT - Voice Inactivity Timer (DTE/Modem).................... 5-11
+VLS - Analog Source/Destination Selection .................. 5-11
+VNH - Automatic Hang-up Control .................................. 5-4
+VPR - Select DTE/Modem Interface Rate ..................... 5-22
+VRA - Ringback Goes Away Timer ............................... 5-15
+VRID - Caller ID (CID) ..................................................... 3-5
+VRN - Ringback Never Appeared Timer ....................... 5-16
+VRX - Start Modem Receive (Record) ............................ 5-5
+VSD - Silence Detection (Quiet and Silence) ................ 5-17
+VSM - Compression Method Selection ......................... 5-18
+VSP - Speakerphone ON/OFF ...................................... 5-23
+VTD - Beep Tone Duration Timer.................................. 5-19
+VTR - Start Voice Transmission and Reception (Voice
Duplex) .................................................................. 5-6
+VTS - Send Voice Tone(s) .............................................. 5-7
+VTX - Start Modem Transmit (Playback)......................... 5-9