Reporting current or selected values, Reporting supported range of parameter values, Result codes – Longshine LCS-8156C1 User Manual
Page 169: 2 voice commands, Vip - voice initialize all parameters, Syntax, Result code, Vrx - start modem receive (record)
Advertising
AT Commands for CX930xx Modem Reference Manual
102752B
Conexant
5-5
Reporting Current or Selected Values
Command: +VNH?
Response: <hook>
Example:
0
For the default setting.
Reporting Supported Range of Parameter Values
Command: +VNH=?
Response: (<hook>
range)
Example: (0-2)
Result Codes
OK <hook>
=
0-2.
ERROR Otherwise.
5.2.2
Voice Commands
+VIP - Voice Initialize All Parameters
This command causes the modem to initialize all voice parameters to their default values.
Syntax
+VIP
Result Code
OK
ERROR
If not in Voice Mode.
+VRX - Start Modem Receive (Record)
This command causes the modem to start the voice reception process.
Syntax
+VRX
Result Codes
OK
ERROR
If not in Voice Mode.
Advertising