New England Arbors VA42044 - Manual (Page 11)

www.edenarbors.com
11 12 x 12 Flat Top Pergola
1
Vinyl Rafter Assembly
Insert one 2x6x12 pressure treated wood into a rafter section
followed by the joiner and another rafter section.
Screw the joiner to vinyl rafters and wood insert using 1 1/2”
screws.
Repeat steps 1 and 2 for the remainder of the rafters.
1
2
3
S T E P S I X
2
Four holes
facing up
Vinyl Beam Assembly
Repeat step 1 from the previous step.
Install the rafter hanger to the main beams using four
1 1/2” screws. Follow the pre-drilled holes to identify locations.
Screw the joiner to vinyl beams and wood insert using 1 1/2”
screws.
1
2
3
S T E P F I V E
2
3