New England Arbors VA42044 - Manual (Page 14)

Fastening Pergola ends and Caps
14 12 x 12 Flat Top Pergola
Install decorative pergola end caps using vinyl weld.
Install the post caps using vinyl weld.
Final position your post trims.
1
2
3
S T E P E I G H T
2
1
To position post trim in place:
1. Slide the post trim down.
2. Apply a generous amount of vinyl glue around the post
3. Slide the post trim back up to the desired location and
allow a few minutes for glue to cure.
To glue pergola end in place:
1. Apply a generous amount of vinyl glue to the pergola end as shown.
2. Slide the pergola end into the beam/rafter and allow a few minutes
for glue to cure.
3