Ram Trucks 2014 3500 - Owner Manual - Manual (Page 310)

4. Press and release the DOWN arrow button to select
“Reset”, then press and release the Right arrow button
to select reset of the Oil Life to 100%.
5. Press and release the Up arrow button to exit the EVIC
screen.
Vehicles Not Equipped With Passive Entry
1. Without pressing the brake pedal, press the ENGINE
START/STOP button and cycle the ignition to the
ON/RUN position (do not start the engine.)
2. Press and release the DOWN arrow button to scroll
downward through the main menu to “Vehicle Info”.
3. Press and release the RIGHT arrow button to access
the ”Oil Life” screen.
4. Press and release the DOWN arrow button to select
“Reset”, then press and release the Right arrow button
to select reset of the Oil Life to 100%.
5. Press and release the Up arrow button to exit the EVIC
screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
308 UNDERSTANDING YOUR INSTRUMENT PANEL