Jacking and tire changing, Jacking and tire changing 1500 series trucks – Ram Trucks 2014 3500 - Owner Manual User Manual

Page 635

Advertising
background image

JACKING AND TIRE CHANGING

Jacking And Tire Changing 1500 Series Trucks

WARNING!

Do not attempt to change a tire on the side of the

vehicle close to moving traffic. Pull far enough off
the road to avoid the danger of being hit when
operating the jack or changing the wheel.

Being under a jacked-up vehicle is dangerous. The

vehicle could slip off the jack and fall on you. You
could be crushed. Never put any part of your body
under a vehicle that is on a jack. If you need to get
under a raised vehicle, take it to a service center
where it can be raised on a lift.

Never start or run the engine while the vehicle is

on a jack.

(Continued)

WARNING! (Continued)

The jack is designed to be used as a tool for

changing tires only. The jack should not be used to
lift the vehicle for service purposes. The vehicle
should be jacked on a firm level surface only.
Avoid ice or slippery areas.

NOTE:

If your vehicle is equipped with an air suspen-

sion system, there is a feature which allows the automatic
leveling to be disabled to assist with changing a tire.

If your vehicle is equipped with a touchscreen, this
feature can be activated through the Uconnect® system.
Refer to “Uconnect® Settings” in “Understanding Your
Instrument Panel” for further information.

If your vehicle is not equipped with a touchscreen, this
feature can be activated through the Electronic Vehicle
Information Center (EVIC). Refer to “Electronic Vehicle

6

WHAT TO DO IN EMERGENCIES

633

Advertising
This manual is related to the following products: