Ram Trucks 2014 Cargo Van Commercial - User Guide - Manual (Page 111)

SHIFT LEVER OVERRIDE
If a malfunction occurs and the shift lever
cannot be moved out of the PARK position,
you can use the following procedure to
temporarily move the shift lever:
1. To access the shift lever override, re-
move the cover located to the top right
of the shift lever in the instrument
panel.
2. Firmly set the parking brake.
3. Turn the ignition switch to the ACC or
ON position without starting the en-
gine.
4. Press and maintain firm pressure on
the brake pedal.
5. The override can be activated by
pressing the white-colored tab, which
can be accessed through the hole in
the instrument panel.
6. Move the shift lever into the
NEUTRAL position.
7. The vehicle may then be started in NEUTRAL.
8. Reinstall the override cover.
WHAT TO DO IN EMERGENCIES
109