Front seats, Power seat, Power lumbar – Ram Trucks 2014 Cargo Van Commercial - User Guide User Manual
Page 19: Manual seat adjustment, Memory seat, Getting started
FRONT SEATS
Power Seat
• The power seat switch controls forward/
back, up/down, and tilt adjustment.
• The recline switch, located on the out-
board side of the seat, controls seat-
back adjustment.
Power Lumbar
• Push the switch forward to increase the
lumbar support. Push the switch rear-
ward to decrease the lumbar support.
Manual Seat Adjustment
Forward/Rearward
• Lift up on the adjusting bar located at
the front of the seat near the floor and
release it when the seat is at the de-
sired position. Then, using body pres-
sure, move forward and backward on
the seat to be sure that the seat adjust-
ers have latched.
Recliner
• Lift the recliner lever located on the
outboard side of the seat, lean back
and release at the desired position.
Memory Seat
• The memory seat feature allows you to
save two different driver seating posi-
tions, driver's outside mirror, adjust-
able brake and accelerator pedals, and
radio station preset settings. The
memory seat buttons are located on
the driver's door panel.
• Adjust all memory profile settings,
press the SET button then press 1 or 2
within five seconds.
GETTING STARTED
17