Ram Trucks 2014 Cargo Van Commercial - User Guide - Manual (Page 117)

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine
Part Capacities
Engine Coolant –
3.6L Engine
We recommend you use
MOPAR ® Antifreeze/
Coolant 10–Year/
150,000 Mile Formula
OAT (Organic Additive
Technology).
13.4 Quarts (12.6 Liters)
Includes heater and cool-
ant recovery bottle filled to
MAX level. Add 2.9 Quarts
(2.8 Liters) if equipped
with rear heater.
Engine Oil with Filter –
3.6L Engine
We recommend you use
API Certified SAE 5W-20
Engine Oil, meeting the
requirements of Chrysler
Material Standard
MS-6395 such as
MOPAR ® , Pennzoil ® , and
Shell Helix ® . Refer to your
engine oil filler cap for cor-
rect SAE grade.
6 Quarts (5.6 Liters)
Engine Oil Filter –
3.6L Engine
We recommend you use
MOPAR ® Engine Oil
Filters.
–
Spark Plug – 3.6L Engine
We recommend you use
MOPAR ® Spark Plugs (Gap
0.043 in [1.1 mm]).
–
Automatic Transmission
Use Only ATF+4 ® Auto-
matic Transmission Fluid.
Failure to use ATF+4 ® fluid
may affect the function or
performance of your trans-
mission. We recommend
MOPAR ® ATF+4 ® Fluid.
–
Brake Master Cylinder
We recommend you use
MOPAR ® DOT 3 and
SAE J1703. If DOT 3 is
not available, then DOT 4
is acceptable.
–
Power Steering Reservoir
We recommend you use
MOPAR ® Power Steering
Fluid +4 or MOPAR ®
ATF+4 ® Automatic
Transmission Fluid.
–
Fuel Selection –
3.6L Engine
87 Octane
20 Gallons (76 Liters)
(Approximate)
MAINTAINING YOUR VEHICLE
115