Ram Trucks 2014 Cargo Van Commercial - User Guide - Manual (Page 82)

ELECTRONIC VEHICLE INFORMATION CENTER (EVIC)
• The EVIC features a driver interactive
display that is located in the instru-
ment cluster. Pressing the controls on
the left side of the steering wheel al-
lows the driver to select vehicle infor-
mation and Personal Settings. For ad-
ditional
information, refer to
“Programmable Features” located in
this guide.
• Press and release the UP button
to scroll upward through the main
menus (Fuel Economy, Vehicle Speed,
Trip Info, Vehicle Info, Messages, Units, System Set-Up, Turn Menu Off) and sub
menus.
• Press and release the DOWN button to scroll downward through the main
menus and sub menus.
• Press and release the SELECT button for access to main menus, sub menus
or to select a personal setting in the setup menu.
• Press the BACK button to scroll back to a previous menu or sub menu.
Compass Calibration
This compass is self-calibrating, which eliminates the need to set the compass
manually. When the vehicle is new, the compass may appear erratic and the EVIC will
display “CAL” until the compass is calibrated.
You may also calibrate the compass by completing one or more 360 degree turns (in
an area free from large metal or metallic objects) until the “CAL” message displayed
in the EVIC turns off. The compass will now function normally.
ELECTRONICS
80