Uconnect® 130, Clock setting, Equalizer, balance and fade – Ram Trucks 2014 Cargo Van Commercial - User Guide User Manual

Page 44: Uconnect, Electronics

Advertising
background image

Uconnect® 130

NOTE:

• Your radio has many features that add to the comfort and convenience for you and

your passengers.

• Some of these radio features should not be used when driving because they take

your eyes from the road or your attention from driving.

Clock Setting

1. Press and hold the TIME button until the hours blink.

2. Turn the TUNE/SCROLL control knob to set the hours.

3. Press the TUNE/SCROLL control knob until the minutes begin to blink.

4. Turn the TUNE/SCROLL control knob to set the minutes.

5. Press the TUNE/SCROLL control knob to save the changes.

6. Press any button/knob or wait five seconds to exit.

Equalizer, Balance And Fade

1. Press the TUNE/SCROLL control knob and “BASS” will display.

2. Rotate the TUNE/SCROLL control knob to select the desired setting.

3. Continue pressing the TUNE/SCROLL control knob to display and set “MID

RANGE,” “TREBLE,” “BALANCE” and “FADE.”

ELECTRONICS

42

Advertising