Carrier Access Access Bank II SNMP User Manual
Page 143
Advertising
13-4
9/24/01
card.
7. Insert the new Controller card and secure it with the five screws removed in Step 7.
8. Insert the voice card(s) and slide the chassis tray back into place.
9. Replace the back plate and tighten the two thumbscrews.
10. Tighten the thumbscrews on the front Control Panel, then reattach the power and interface
cables.
11. Apply power to the Access Bank II - SNMP.
Figure 13-2: Removing the Chassis Tray
Advertising