Carrier Access Access Bank II SNMP - Manual (Page 163)

14-18 9/24/01
p2to15 - O.151
p2to20 - QRSS w/o bit stuffing
p2to23 - O.151
qrss - QRSS pattern (default)
zeros - all zeros
r - optional error rate
0 - disable errors (default)
r=1-7 - error rate of 10^-r
QRSS to net ...... v35 v1 send network
> v35 v1 send network qrss
equipment ........ Send Pattern to Equipment
[p] [r] ........ p - optional pattern
alt - alternating 1/0
d4up - D4 loopup: 00001
d4dn - D4 loopdown: 001
ones - all ones
p1in8 - 00000001
p511 - O.153
p2047 - O.152
p2to15 - O.151
p2to20 - QRSS w/o bit stuffing
p2to23 - O.151
qrss - QRSS pattern (default)
zeros - all zeros
r - optional error rate
0 - disable errors (default)
r=1-7 - error rate of 10^-r
p511 to router .. > v35 v1 send equipment p511
speed .............. Single Channel Speed
nx56 ............. 56Kb per Channel with 7 Bit Data
nx64 ............. 64Kb per Channel with 8 Bit Data
dsu ................ DSU V.54 Remote Loopback Protocol
off .............. Do not respond to in-band V.54 signals
on ............... Respond to V.54 in-band signals (default)
verbose .............. Display/Set Command Fill Verbose Mode
off ................ Disable command fill suggestions
on ................. Enable command fill suggestions (def)
version .............. Display Version Numbers in System
14.4.4 Configuration Commands
14.4.4.1 aco
Use the aco command to display, or turn on and off, the Alarm Cutoff feature.