Slant/Fin SC-3 - Manual (Page 9)

SC-3 Controller 10
Symbol Description
Stage
Displays which stage relays are turned on.
Pump
Displays when the primary pump relay is turned
on.
˚F, ˚C, min, hr
Units of measurement.
Installer Access Level
Displays when the Installer/Advanced Dip
switch is set to Installer
Pointer
Displays the control operation as indicated by
the text.
Warning/Alarm
Displays when an error exists or the alarm relay
is turned on.
UnOccupied Schedule
Displays when the control is in UnOccupied
Mode.
DISPLAY:
Occupied Schedule
Displays when the control is in Occupied Mode.