Slant/Fin DHWG - Manual (Page 2)

Use these instructions in conjunction with the boiler Installation and Operating
Instructions (publication BA-40 for Bobcat and LX1-40 for Lynx boilers) for utilizing this
domestic hot water generator with the boiler.
Components included:
1. See Figure 1 for the identification and location of each component and piping
connection provided in the DHWG system.
2. The DHWG pump is sized for the required flow rate through the plate exchanger
to provide adequate hot water production.
3. A flow switch is provided to detect any flow of domestic water, and will energize
the DHWG pump and give a call for the burner to operate as required for the demand.
4. DHWG pump provided has integral flow check, to prevent water flow in
the DHW boiler loop when it is running for space heating demand.
2
DHWG Domestic Hot Water Generator
Installation Instructions
Figure 1. Components and piping of DHWG.