StarTech.com PM1115P2 Full User Manual
Page 16
Advertising
Instruction Manual
14
Mac OS
To use the print server in Mac OS (10.2 and up), no software installation is required. The
necessary configuration can be done through the Web Console.
1. Open your browser and enter the IP address of the print server in the address bar of
your web browser (Default: 192.168.0.10), then press Enter.
2. Enter your user ID and password (Default: admin / no password).
3. Click the Setup section, then the TCP / IP tab.
4. Change the Rendezvous Settings box to Enabled and enter a Service Name to
identify the print server on the network.
5. Click Save & Restart to apply the settings.
6. On your Mac system, open your System Preferences page, then the Print & Scan
Utility.
Advertising