StarTech.com PM1115P2 Full - Manual (Page 33)

Instruction Manual
31
SNMP Tab
Allows you to configure Simple Network Management Protocol (SNMP) related
settings for the print server. A host on the network running Network Management
System (NMS) software can access the print server device by reading and writing the
MIB objects stored in the device. Click the Save & Restart button to apply any changes
made.
SNMP Community: The print server supports up to two community names. The
default community name is public (case-sensitive), with Read Only access rights by
default.
Support HP WebJetAdmin: Enable/Disable the HP WebJetAdmin Support.
SNMP Traps: Enable the function of sending SNMP Authentication Failure trap
messages to the network administrator, if the community name within a SNMP request
is not correct.