StarTech.com PM1115P2 Full - Manual (Page 32)

Instruction Manual
30
AppleTalk Tab
Allows you to configure AppleTalk related settings for the print server, to accept jobs
from Mac workstations using this protocol. Click the Save & Restart button to apply
any changes made.
Zone Name: Enter an AppleTalk Zone name that you want the print server to belong
to, or leave it in default (This enables the print server to automatically search and link
itself to the default zone that is set on the AppleTalk router, if found). We also assume
that at least one AppleTalk Zone exists on the network. If no zone exists, the print
server itself displays the zone name as an asterisk (*) in the current AppleTalk Status
of the print server in the web browser.
Port Name: Enter a name for identification purposes or leave as the default
(recommended).
Note: The default print server’s Chooser name is as shown as follows:
<ATALK_PS>-xxxxxx-1, where xxxxxx represents the last six digits of the device’s Node
ID, E.g. ATALK_PS-40EEED-1. If changed from the default name, the print server will
append the last six digits to the name you specify.
Printer Type: The default printer type is LaserWriter (recommended).
Data Format: Available data formats include ASCII, TBCP and BCP.