StarTech.com PM1115P2 Full - Manual (Page 18)

Instruction Manual
16
Operation
PSAdmin Application (Windows)
After the software has successfully been installed, you can start the PSAdmin utility
from your Windows Start menu by clicking Start -> Programs -> Network Print
Server -> PSAdmin
For NetWare systems, Run PCONSOLE and create the necessary parameters (Refer to
your Novell NetWare print server/Services manual for details), log into your NetWare
file server as a Supervisor (Admin) or equivalent, then run PSAdmin.
9. Click OK once you’ve selected your printer make / model, then click Add to
complete the installation.