StarTech.com PM1115P2 Full - Manual (Page 20)

Instruction Manual
18
Setup Wizard
The Setup Wizard is a configuration program that can assist you in setting up the
necessary parameters for your print server device for either TCP/IP or NetWare.
TCP/IP
1. Click the Wizard button from the PSAdmin tool bar.
2. Select TCP/IP Wizard from the window that opens and then click Next.
3. Choose either “Obtain an IP address from DHCP server” if there is a DHCP server on
your network. Or “Specify an IP address” to manually enter your desired IP settings
for the device.
Note: DHCP is disabled by default, as it is strongly recommended to assign a static
IP address to print servers