StarTech.com PM1115P2 Full - Manual (Page 25)

Instruction Manual
23
Multiple Print Queues Configuration
To configure the print server to service multiple print queues, please follow the
instructions listed below:
1. Log into your NetWare file server as a Supervisor (Admin.) or equivalent.
2. Run the PSAdmin from your Windows.
3. Select the print server and to be configured.
4. Click the Wizard icon in the tool bar.
5. Type in a Print server and a Print Queue Name (For more detailed information about
Wizard, please refer to the “Wizard” section in this chapter).
6. Run the NetWare’s PCONSOLE and create additional print queues.
7. Select the Print server name you specify in Step 5.
8. Select the “Print server Configuration” option and select the ”Queue Serviced by
Printer” option (For NetWare 4.x’s PCONSOLE, please select “Printers” option and
select “Printer 0” instead).
9. Select the “Printer 0” and press the [Insert] key to add the print queues you create
in Step 6 into the list (For NetWare 4.x’s PCONSOLE, please select “Print queues
assigned” option instead).
10. Reset the print server by clicking the “Reset” icon from the PSAdmin. Done.
Note: Please refer to NetWare’s Print server/Services manuals for detailed
PCONSOLE commands
Restart
The Restart function allows you to restart the print server device in order to establish a
new connection, or for new settings to take effect.
1. Select the device you would like to reset and click the Restart button from the
PSAdmin toolbar.