StarTech.com PM1115P2 Full - Manual (Page 30)

Instruction Manual
28
TCP/IP Settings: Choose either “Obtain TCP/IP settings automatically (use DHCP/
BOOTP)” if there is a DHCP server on your network. Or “Use the following TCP/IP
settings” to manually enter your desired IP settings for the device.
Note: DHCP is disabled by default, as it is strongly recommended to assign a static IP
address to print servers
Rendezvous Settings: Enable/Disable Rendezvous(Bonjour) support for Mac OS 10.2
or higher.
TCP/IP Tab
Allows you to configure TCP/IP and Rendezvous (Bonjour) settings for the print server.
Click the Save & Restart button to apply any changes made.