StarTech.com PM1115P2 Full - Manual (Page 34)

Instruction Manual
32
When an unusual condition or activity occurs, the SNMP agent alerts the SNMP
manager through SNMP traps. The following list summarizes the SNMP trap messages
that the print server will send out:
Activities/SNMP Trap Messages Description
Link Up or Link Down
When the network interface on the print server
fails, a link down trap message is generated
if the network interface comes back to life, a link
up trap message is sent.
Cold Start or Warm Start
When the print server restarts, the cold start or
warm start trap message is generated.
Authentication Failure
When the print server received a SNMP request
with a community name that does not match
the community name the print server is
configured with, an authentication failure trap
message is generated.
In the print server's SNMP implementation, the following MIB objects are available for
updating:
MIB Object Name Description
system.sysContact Indicates the network administrator’s name.
system.sysName
Indicates the print server’s name for
identification.
system.sysLocation Indicates the location of the print server.
snmp.snmpEnableAuthenTraps
Enables or disables the function of sending
SNMP Authentication Failure trap message to
the network administrator, if the community
name within a SNMP request is not correct.