Vexilar LC-10 - Manual (Page 10)

OPERATION
Figure 9 shows the main controls
of the LC-10.
ON/OFF
Turns the LC-10 ON and OFF.
Simply turning the unit on will start
the Automatic System. This will give
good results in most conditions. If you
choose to modify any of the control
features, your settings will be saved
in memory when the unit is turned
off. When you turn it on again the
unit will operate the same way as it
did when you last used it.
AUTO
Press the AUTO button to turn on or off the automatic
range control feature. This feature will automatically change
the depth range for you when the depth of the water moves
outside the current range. When the AUTO feature is off
you must change the range manually by pressing the
SHALLOW or DEEP buttons.
Figure 9
10