Vexilar LC-10 - Manual (Page 11)

RANGE CONTROL
The two buttons at the top right of the control panel set
the depth range when the Auto Mode is off. Pressing the
SHALLOW button changes the range to the next shallow-
est range. Pressing the DEEP button changes the range to
the next deeper range.
LIGHT ON/OFF
Press the LIGHT ON/OFF button to turn on the
Backlight. Press it again to turn the backlight off.
NOTE
-
The backlight will double the current requirement of the
LC-10, thus cutting your battery life in half.
FISH ID ON/OFF
Press the FISH ID ON/OFF button to turn the fish iden-
tification feature on or off. When the feature is on, any tar-
get that the LC-10 sees will be judged as to whether or not
it is a fish. If the unit determines that there is a good chance
the target is a fish it will display a fish shaped symbol on
the display.
ALARM ON/OFF
Press the ALARM ON/OFF button to turn on or off the
fish alarm feature. When ON this feature will sound an
alarm when a fish is detected. This feature works inde-
pendently from the FISH ID feature.
11