Winco DPG-2145-001 - Manual (Page 29)

Manual 36526F DPG-21XX-00X Digital Controllers
Woodward 21
Communications Error
The following message window appears when Universal PST is running and
unable to communicate with a DPG.
After the problem is found and corrected, you can either restart Universal PST or
press the <Read All> button to clear the error message. The <Read All> button is
near the lower left corner of Universal PST’s main startup screen.
Universal PST User Interface Overview
Universal PST has two main display modes.

Table View (the main startup screen)

Chart View
TABLE VIEW
In Table View the user can:

View the current values for all user programmable parameters in the
Parameter Setup panel.
 Edit a parameter’s value by double-clicking on a cell in the ―Value‖ column
of the table.

Press the <Read All> button to refresh the values displayed in the
Parameter Setup panel.

Press the <Write All> button to transmit setup values to the controller.

Press the <View Status> button to display read only parameters in the
Status View panel.