Zipper's Performance 309-575 - Manual (Page 7)

Thunder Heart Performance Corp. 615-672-8811 www.thunder-heart.com
EI5011.doc
3
CHAPTER 2 MAIN MENUS AND WINDOWS
2.1 File Menu
Create a New File
From the FILE menu choose NEW, or type Ctrl+N. All calibration settings will
revert back to the original default state.
Open an Existing File
From the FILE menu choose OPEN, or type Ctrl+O. A listing of files will
appear. Any files with the “.slk” extension may be opened by selecting it with
the mouse.
Close the Current File
From the FILE menu choose CLOSE, or click the “X” icon in the upper right-
hand corner of the window.
Save the Current File
From the FILE menu choose SAVE, or type Ctrl+S. The calibration file
currently displayed will be saved under the current filename. Always save
files that you may want to use later.
Save the Current File Under a Different File Name
From the FILE menu choose SAVE AS. The calibration file currently
displayed will can be saved under a different filename.
Upload Current Module Settings
From the FILE menu choose UPLOAD MODULE SETTINGS, or type Ctrl+U.
This function transfers calibration information from the ignition module to the
computer screen where it can be analyzed, modified, or saved as a
calibration file.
Download File to Module
From the FILE menu choose DOWNLOAD SETTINGS TO MODULE, or type
Ctrl+D. This function transfers calibration information from host computer to
ignition module.
Note: This will overwrite the current ignition module settings so it may be wise to
upload from the ignition module and save it as another file first.