Canon BJC-3000 - Manual (Page 12)

Notes on Handling the USB Interface
When you use the printer through the USB interface, you can connect or disconnect the USB inter-
face cable while the printer and computer are turned on. However, you must take care over the fol-
lowing points.
Printer Cable Connector (USB Interface)
■ Follow the correct order to install the printer driver properly.
When you connect the printer and computer using the USB interface cable, follow the order
described in the Getting Started manual.
If you fail to follow the correct order, the printer driver may not be installed properly.
■ Do not connect or disconnect the USB interface cable in the following circum-
stances.
When you use the printer with the USB interface, you can connect or disconnect the USB interface
cable while the printer and computer are turned on. However, do not connect or disconnect the
USB interface cable in the following circumstances; the printer and computer may not operate
properly.
- While the printer driver is being installed
- While the operating system (Windows 98 or Mac OS) is starting up
- While the printer is printing
■ Wait for at least 5 seconds before connecting the USB interface cable again.
When you disconnect the USB interface cable while the printer and computer are turned on and
connect it again, wait for at least 5 seconds. If you connect the USB interface cable immediately
after disconnecting, the printer and computer may not operate properly.
10
Rear View