Canon BJC-3000 - Manual (Page 61)

59
Cleaning the Printer
After long use paper dust and room dust may accumulate around the paper output slot and other
parts of the printer.
1
Press the POWER button to switch the printer off.
2
Make sure that the POWER lamp is off, then
unplug the power cord from the power outlet.
Never unplug the power cord while the printer is turned
on. This could cause a malfunction in the printer.
To avoid personal injury from touching live printer compo-
nents, always unplug the printer before cleaning.
3
Remove the paper output tray.
4
Use a soft, dry cloth to wipe the area around the
paper output slot.
To avoid personal injury from burns or electrical shock or
damage to the printer during cleaning, never use a flam-
mable solvent such as thinner, benzene or alcohol.
■ Cleaning the Paper Feed Rollers
With frequent use of high resolution paper and other coated paper, paper dust from the coated
surfaces of such media accumulates around the paper feed rollers and may cause misfeeds and
paper jams.
If this happens, use a special cleaning sheet to clean the paper feed rollers inside the printer. For
more details on how to clean the paper feed rollers, refer to the "Cleaning the Paper Feed Rollers"
section in the Reference Guide.