Canon BJC-3000 - Manual (Page 77)

75
Other problems
Refer to the Reference Guide on the Setup Software & Reference Guide CD-ROM for information on
how to deal with the problems listed below.
● Colour document printed in monochrome
● Colours not clear
● Printed text rotated 90 degrees
● Printing in top left corner
● Text cut off at bottom right corner, right edge, or bottom edge
● Text or image reversed (mirrored)
● Enlarged/reduced printing not correct
● Single file page prints over two or more pages
● Straight lines are broken
● Backs of pages stained with ink
● Ink blurred
● Printed surface scratched
● White streaks visible
● Colours streaked or uneven
● Printer will not switch on
● Print job will not start
● Printing starts but nothing printing
● Cartridge holder does not move to left
● Envelopes do not feed
● Paper skewing during feeding
● Multiple sheets feed together
● Error messages other than "Error writing to LPT or USBPRN"
● "Application error" or "General Protection Fault" is displayed.
● BJ Status Monitor does not open
● Cannot execute background printing
Troubleshooting