Canon BJC-3000 - Manual (Page 41)

39
4
Load the image you wish to scan in the auto sheet feeder and start prescanning.
When you wish to scan only a portion of the image, use prescanning.
You can select a portion of the image for actual scanning. This allows you to shorten the time
required for scanning.
You can also check if the image is placed correctly in the auto sheet feeder when the prescanned
image is displayed.
➀ Insert the image you wish to scan into the scanning holder, then click Prescan.
➁ When you wish to scan only a portion of the entire image, specify the prescanning area by
dragging the mouse.
5
Load the image in the auto sheet feeder again and start scanning.
➀ Load the image you wish to scan in the auto sheet feeder again and click Scan.
➁ Save the scanned image.
6
Install the BJ Cartridge and print the scanned image.
For more details on how to use IS Scan and IS Scan Plus, refer to the Driver and Utility Guide for
Windows Users (CD-ROM) or the Driver and Utility Guide for Macintosh Users (CD-ROM).
Using the Scanner