Canon BJC-3000 - Manual (Page 53)

51
Cleaning the Print Head
Cleaning the print head clears the nozzles. There are two ways to clean the print head: normal print
head cleaning and deep print head cleaning. Always execute normal print head cleaning first. If this
does not correct the problem then execute deep print head cleaning.
Cleaning the print head consumes ink so clean the print head only when necessary.
You can also execute print head cleaning directly from the printer. Hold down the reset button, and
release it after the power lamp flashes once.
1
Make sure that the printer is switched on.
2
Select normal print head cleaning in the printer
driver.
➀
Open the Printer Properties dialogue box, then click the
Maintenance tab.
➁
Select the normal print head cleaning icon in the Print
Head Cleaning box.
➂
When a confirmation message appears, click the OK
button.
The POWER lamp starts flashing and print head clean-
ing begins. It takes approximately 40 seconds until the
POWER lamp stops flashing and the normal print head
cleaning operation is completed.
Routine Maintenance