Canon BJC-3000 - Manual (Page 31)

29
6
Pick up the Ink Tank BCI-3Y (Yellow) and pull up
on the orange tape to break the seal of the clear
film.
7
Grip the bottom of the ink tank as shown and
twist off the orange protective cap in the direction
of the arrow.
Do not press this side of the ink tank, to prevent ink spills.
8
Install the ink tank in the first slot of the BJ
Cartridge.
Gently press down on top of the ink tank until it
locks into place.
9
In the same way, set a photo magenta ink tank
(BCI-3PM) (
➀
) and photo cyan ink tank (BCI-
3PC) (
➁
) starting from the right, in the stated
order. Press in the photo black ink tank (BCI-
3PBK) firmly until it clicks into place. (
➂ )
10
Close the front cover.
This completes the installation procedure of the
Photo BJ Cartridge.
• Never attempt to re-attach the protective caps and tapes
to the BJ Cartridge or ink tank.
• To avoid poor quality printing, never touch the print heads.
When using the Photo BJ Cartridge for the first time...
You need to align the print head and select the appropriate print settings in the printer driver.
➡ Aligning the Print Head ( ➡ p.55)
➡ Driver and Utility Guide for Windows Users (CD-ROM)
➡ Aligning the Print Head ( ➡ p.57)
➡ Driver and Utility Guide for Macintosh Users (CD-ROM)
Installing the Photo BJ Cartridge