Sears 385.12514 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2* PREPARE THE MACHINE FOR SEWING
Pick Up the Bobbin Thread
1. Raise presser foot lever. Hold top
thread loosely in left hand and rotate
handwheel toward you one corrrplete
turn.
2. Bring bobbin thread up by pulling top
thread.
oi the presser toot, leaving 4 to 6
inches of thread clear.
If you cannot pick up bobbin thread by tallowing steps given above, then check;
1. Is needle threaded trom front to back?
2. is thread tangled around needle?
3. Are 3 to 4 inches of thread coming from the shuttle?
4. Is thread trom shuttle tangled?
5. Is bobbin properly installed in the bobbin case?
6. Is the machine threaded according to the Instructions?
12