Sears 385.12514 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 5. CARE FOR THE MACHINE
Oiling the Machine
Oil the maohirte in all areas shown on this page at least once a year; otherwise the machine can become sluggtsh or will knock loudly. If you use the machine Irequently,
oil the machine under the top cover about every three months. In case machine is not used for an entended lime, oil it betöre sewing. Use good quality sewing machine
oil. One or two drops ot oil is sufficient Remove excess oil. otherwise it may stain fabric. ^
Kenmore sewing machine oil is available at your nearest Sears retail store.
NOTEiUnplug the machine before oiling. Remove needle and put needle bar m lull down position.
» Oil behind the Face Cover Plate and under the Arm Cover Plate
e Oil the Underside
Open face cover plate and/or remove arm cover plate by loosening top screw to oil points in
illustration.
Use only a drop of oil; do not over-oil.
Open the shuttle cover by pulling down the embossed part on
the left side ot the cover. Tilt the machine head back and
remove bottom cover. Oil points in illustration.
40