Sears 385.12514 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE THE MACHINE FOR SEWING
Set Up the Machine
• Plug In the Machine and Switch on the Power
• Foot Control Use
NOTE. Before inserting the plug into your
machine, be sure the power switch is OFF,
1. Check your outlet to be sure it is a 110 to 120 Volt
AC outlet
2. insert the machine plug into the three-prong plug
connector, as shown. It will only fit one way.
3. Insert the power supply plug into the outlet
4. Push the power switch to turn on the
power and sewing light.
SAFETY FEATURE;
Your machine will not operate unless the
power switch is turned on. II you are
interrupted or stop sewing, turn off the
power switch to prevent injury to children.
you sew.
To increase speed, gently press down with
the ball at your toot.
To decrease speed, release your toot pres
sure slightly.
NOTE:
The toot control is sensitive and will
increase or decrease your sewing
speed immediately.
Practice on a scrap of fabric to regu
late your sewing speed to your
taste and needs.