Sears 385.12514 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 5. CARE FOR THE MACHINE
Replacing the Light Bulb
Cleaning the Machine
To insure that your machine operates at its best, you need to keep the essential parts clean at all times*
The teed dogs and shuttle race areas can attract dust and lint. Your machine can become siuggish or knock loudly if a thread
is caught.
^
Check and clean those areas about every three months under normal use.
If you sew frequently, clean more often.
* Clean the Feed Dogs
1. Unplug the machine and open the
face cover*
CAUTION! The light bulb could be
HOT. Protect your fingers
when you handle it.
2. Push the bulb up and turn the bulb
counter-clockwise to remove it.
3- Put the new bulb in by pushing it up
and turning it clockwise.
^ r
J K
1. Unplug the machine. Remove 2. Use a lint brush to clean the teed 3. Replace needle plate,
presser loot and needle. Using a dogs,
screw driver, remove needle plate.
38