Reverse stitch control – Sears 385.12514 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE THE MACHINE FOR SEWING
Reverse Stitch Control
For Zigzag Stitch
in a correct zigzag stitch, the bobbin threads wili not show on the top side ol
fabric and the top threads will show slightly on the bottom side. See below lor
the correct appearance. To match this appearance, adjust the top tension.
Top tension
Too
Tight
Bottom
Side
of Fabric
Too Tight:
— Corner ot each zig
zag will pull together
on the top side ot
fabrics
Top tension
Too Loose
Bottom side of Fabric
Too Loose:
— The top thread will
loop through bottom
side of fabric and
will be pulled almost
together.
dust Right
J
Just Right;
Minimize the amount ol
top thread visible on
the bottom side ol
fabric without causing
excessive puckering Or
causing
the
bobbin
thread to show on the
top Side. Results vary
with tabric, thread and
sewing conditions.
To reverse stitch, hold down this control during
sewing.
Release to sew forward again.
14