Sears 385.12514 - Manual (Page 23)

SECTION 3. REARN THE STITCHES
9, Lower the presser loot and stitch the
rest of the seam.
right side up.
INVISIBLE ZiPPER AND CORDING
INVISIBLE ZIPPER
Adjust the loot so the needle is sewing through
the center hole of the tool and one groove of the
foot is nding on the teeth o! the zipper as shown.
Follow the zipper manuiactureFs instructions.
After zipper has been inserted, finish sewmg
seam by shifting toot to side position sewmg
through side notch.
CORDING
Foot can also be used to make cording for
slipcovers etc. Cover a cord with a strip ol bias
tabric and sew as shown.
NOTE.
Use "Low Bar Sewing Machine ZIPPER
FOOT" (6757) tor "invisibie zipper" and
"cording", which can be obtained at any
Sears retail store.
set the zipper toot on the right side
ol the needle.
12. Stitch across and below the bottom
ot the zipper.
13. Turn the corner and continue to
guide the fool along the zipper
teeth, as shown.
Stitch through the tabric and zipper
tape.
zipper.
15. Lower the needle into the tabric
and raise the presser foot.
16. Remove the basting stitches and
open the zipper.
17. Lower the toot and stitch the rest o!
the seam. Make sure the fold is
even.
21