Sears 385.12514 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE THE MACHINE FOR SEWING
Stitch Length Control
The higher the number, the longer the stitch.
"0"means no teed.
Depending upon your tabric or your own prelerence In buttonholes, you may alter the buttonhole
stitch density within the blue buttonhole range on the stitch length controL
Adjusting Stretch Stitch Balance
To select Stretch Stitches, set this control at ▼
position.
For stretch stitch sewing, the Stitch Length Control
should be in the detent position between S and L
{T position) tor most materials. Depending upon
the type of fabric used, you may need to adjust
this control to match forward stitches oi stretch
sewing with reverse motion stitches.
To shorten stretch stitches, turn the control
slightly toward "S" To lengthen, turn toward
"L”
L • y • S
16