I__i – Sears 385.12514 User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SECTION 3. REARN THE STITCHES

Smocking

• Overcast Stretch Stitching

straight siitdng lines 3/8” apart across
the area to be smoked.
Knot the threads along one edge. Puli
the bobbin threads and distribute the
gathers evenly. Secure the threads at
the other end. Sew the decorative
stitch between the gathering stitches.
Pull out the gathering stitches.

NOTE:

Loosen the top thread

tension to make gathering
easier.

Set the Machine

Slüch

SUlch selector

.......

1

-... . ,____

Top thread tension

conifQl 1 lo 4

Slitch length
contfoi brown
streich stfich
position

I__i

Zigzag foot

The Stitch and Its Uses

This stitch can be used for sewing a
seam with an overcast finish.

The seam is lormed and finished in one
operation. It can be used when you are
making swimwear, ski pants and other
garments that require stretch.

Here‘s How

Place the raw edge of the fabric to the
LEFT of the needle as shown.
Stitch so the needle pierces the fabric

just short of the outside edge.

Or. place your fabric to allow a 5/8"
seam, then trim seam aiiowance after.
Raw or worn edges ol oider garments
can be overcast to prevent further
raveling.

NOTE:

Use a blue stretch labric
needle, which effectively
prevents skipped stitches.

32

Advertising