Sears 385.1884180 - Manual (Page 13)

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
e Presser Foot Types
Zigzag Foot Straight Foot
To Snap Orr
1, Place the presser foot so the hori­
zontal pin on the foot lies just
under the groove of the foot
holder.
2, Lower the presser foot holder to
lock the presser foot in place.
NOTE; If you do not hear the
presser foot snap in place,
press down on the presser
foot holder firmly until you
hear the snap.
stitching.
Uses: Zigzag stitching (see page ЗБ),
Bar tacking (see page 37).
Button sewing (see page 39),
Rick-rack stretch (see page 40).
Three-step Zigzag (see page 41).
Overcast strefch (see page 42),
Lace work (see page 44j,
Two-point shell stitching
(see page 54),
Smocking (see page 55),
Stretch patching (see page 55).
Fagoting (see page 56),
Herring bone stretch (see page 56).
Elastic stretch (see page 57).
Box stitching (see page 57).
Two-point box stitching (see page 58),
Overedging stitch (see page 58).
Decorative stretch stitching
(see page 59).
Use this foot exclusively for straight stitching
using center needle position only.
Uses: Straight stitching (see page 31),
Topstitching (see page 32).
Straight stretch (see page 34),
Quilting (see page 33),
11