Adjusting stretch stitch batanee – Sears 385.1884180 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Stitch Length Control
stitches setting.
The higher the number, the longer the stitch.
0 means no feed.
To select Stretch Stitches, set this control at Stretch Stitch.
NOTE:
When you select decorative stitches (green) or buiit-in buttonhole
(blue), make sure that you do not set the stitch length control at
“Stretch Stitch".
Study the orange, green, yellow and blue section around this
control. These are recommended zones of stitch length and color-
coded to the stitches pictured on the stitch indicator panel.
22
Adjusting Stretch Stitch Batanee
Smock infl strelcli
Rick rack stretch
position (between "+" and
or ►
position). When sewing some fabrics, you
may need to adjust this control to
balance the stitches for appearance sake.
If design seems open like the illustrations
to the left, adjust the control slightly
toward " until design looks like the
center design.
If the design appears to be closed as in
the right hand illustrations, turn the
control toward “+“ until stitching is as
you desire.