Setting up your machine, Stitch selector, H^snmop© sewing machine – Sears 385.1884180 User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
H^SnmOP© Sewing Machine
18841
SETTING UP YOUR MACHINE
1. You'll find spool pins on the top
cover
Pull up the spool pins and place the
spool pin felt on the pins*
2.
Plug
foot
control
Into
machine
receptacle. Then connect cord into
any 110"' 120 volt A..C wall outlet.
3. Your Kenmore sewing machine has
been thoroughly oiled at the factory,
Be sure to wipe off "the needle plate
area, bed plate arrd shuttle carefully
before sewing a garment It Is wise to
practice on a scrap of fabric so any
surplus oil is absorbed
STITCH SELECTOR
Thera are certain types of stitches that are used more often than others in your.garment
construction. Because of their frequent use, you will soon realise the convenience offered
to you by this control.
The desired stitch will be obtained by turning the Stitch Selector Dial until the stitch is
indicated by the red line on the indicator panel.