Oiling the machine – Sears 385.1884180 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 5. CARE FOR YOUR MACHINE
Clean the Hook Race and Feed Dogs
2
.
3.
4,
the presser foot and needle.
Remove the bobbin face cover
plate.
Remove the screw on the left side
of the needle with the large screw
driver.
Remove the needle plate.
bobbin holder and remove it.
6. Use the lint brush to dean the
feed dogs, hook race and bobbin
holder. Also use a soft, dry
cloth.
Line up the red marks and place
the bobbin holder so the knob fits
next to the stopper in the hook
race, as shown above.
Oiling the Machine
Open face cover plate and oil points as shown below at least once a year. On or
two drops of oil is sufficient.
Remove excess oil, otherwise it may stain fabrics.
In case machine is not used tor an
extended time, oil it before sewing.
Use good quality sewing machine oil.
No other oiling is required
Above points are only area which
require oiling on this machine.
64