Sears 385. 17526 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE THE MACHINE FOR SEWING
Know What the Presser Feet Will Do
o Check The Presser Foot
The Presser feet are an important feature this machine. You need to know
what each does in order to use them effectively.
Your presser toot is held in place by a Foot Holder. Each presser foot merely
snaps on the loot is holder, which is seldom removed.
If you need to remove or attach the toot holder, here is what you do:
e Change the Presser Foot
Use the correct presser toot tor the stitch you wish to sew. Consult the Stitch
Pattern Chat and the detailed direction tor sewing with the various presser
loot.
To Remove:
To Attach:
To Snap Off:
Turn the screw toward the back of
the machine. Use the large screw
driver.
1. Match the hole in the toot holder
with the thread hole in the
presser bar.
2. Fit the toot holder screw into the
hole.
3. Tighten the screw by turning it
toward you.
1. Raise the needle bar to its highest position by turning the hand wheel
toward you.
2. Raise the presser toot.
3. Press the snap-on button on the back of the toot holder. The presser foot
will drop off.
11