Sears 385. 17526 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 3. LEARN THE STITCHES
Buttonhole Making (continued)
Best results are obtained by using
#60 ~ #80 light weight threads as
bobbin thread.
NOTE; It is advisable to use a blue
stretch fabric needle when
sewing knits and synthetic
fabrics.
You can obtain buttonholes
with a wider cutting space by
setting the stitch width control
at 1.5 instead ot 2.
b. Raise the needle to its highest position.
c. Remove the foot holder.
d. Pull bobbin thread out about 3" straight back toward rear ot machine.
e. Insert hook of base plate into rectangular hole of needle plate.
f. Pull lever back to align the hook with the rectangular hole.
g. Snap base plate down to fit two pins
(A)
at back of base plate into two round
holes (B) on needle plate.
Release lever.